Caparol Capadur RenoTech 2.5 liter white

Details for Capadur RenoTech 2.5 liter white:

Purpose of use:
Suitable for the colored design and moisture protection of non-dimensionally stable, limited dimensionally stable and dimensionally stable wooden building components (such as wooden facades, wooden cladding, balcony railings, shutters, gates, half-timbered houses, shingles, windows and exterior doors).
One-pot system - primer, intermediate and topcoat on all wooden components.

Before coating sheet-shaped wood-based materials (such as solid wood panels or veneer-laminated plywood), please observe the instructions in BFS leaflet no. 18, section 2.2.3 ff.
Veneer cracks, delamination, mold growth, and leaching of ingredients cannot be prevented on coated wood-based panels.

Capadur RenoTech is equipped with a film preservative to protect the coating surface against fungal growth. Therefore, its use is only permitted outdoors and on the inside of windows and exterior doors.

Film preservation offers effective protection against mold growth on the coating surface in most cases. However, depending on the biological load, early infestation can occur in individual cases, particularly under roof overhangs. On wood-based panels (e.g., plywood, construction plywood, laminated veneer lumber, etc.), infestation must generally be expected even before the usual warranty periods have expired.

Not suitable for horizontal surfaces such as terrace floors.

Characteristics:
- High weather resistance
- Ventilating coating film
- High penetration depth
- Low film-forming
- Very good surface penetration and adhesion due to low molecular weight oils
- Extremely high moisture protection through hydrophobization (Hydroperl)
- One-pot system
- Resistant to discoloring wood components
- Thixotropic, drip-resistant
- Very good renovation potential because the coating usually does not flake off.
- Suitable for historical wooden building components
- Surface temporarily protected against fungal infestation

Shade:
White

Material basis:
Long-oil alkyd resin, solvent-based

Gloss level:
From satin matte to satin gloss.
The gloss level can vary depending on the wood surface.

Container:
2.5 liters