Sika® Sikafloor®-82 EpoCem® (Comp. A+B+C) 29 kg light gray

Details for Sikafloor®-82 EpoCem® (Comp. A+B+C) 29 kg light grey:

3-component epoxy resin cement mortar for layer thicknesses of 4.0 - 7.0 mm.

Sikafloor®-82 EpoCem® is a 3-component, epoxy resin-modified, lightly textured cement-based flowable mortar for all applications under Sikafloor coatings in interior and exterior areas.

Application:
Suitable for all cementitious, mineral substrates. For magnesia and anhydrite screeds, request special advice. Temporary moisture barrier under synthetic resin coatings with a thickness of 4.0 - 7.0 mm. Applied to substrates with high moisture content or on fresh concrete.

Flowable flooring with a thickness of 4.0 - 7.0 mm for:
- Leveling or reprofiling of rough and milled concrete surfaces
- Floor coverings for damp subfloors without basements
- Reprofiling layer for epoxy protective coatings and coatings on floors
- Flow screeds as a substrate for plastic coverings, carpets and parquet flooring
- Refurbishment of mono- and vacuum floors
Suitable according to EN 1504-9:
- Principle 2 "Regulation of the water balance of the concrete", Method 2.3
- Principle 3 "Concrete Replacement", Method 3.1
- Principle 5 "Physical Resilience", Procedure 5.1
- Principle 7 "Maintaining or restoring the passivity of the reinforcing steel", methods 7.1 and 7.2
- Principle 8 "Increasing electrical resistance", Method 8.3

Advantages:
- prevents osmotic blistering of the synthetic resin coating on damp substrates
- Excellent adhesion to fresh or hardened concrete, whether wet or dry
- can be recoated with Sikafloor® synthetic resin systems after 24 hours (+20°C / 75% RH)
- Class R4 according to DIN EN 1504-3
- excellent flow properties
- impermeable to liquids, but permeable to water vapor
- frost and de-icing salt resistant
- Good chemical resistance compared to other cementitious systems
- Coefficient of thermal expansion similar to concrete
- excellent early and final mechanical strengths
- Excellent resistance to water and oils
- ideal as a base for a smooth surface finish
- For indoor use; for outdoor use see "Further instructions".
- solvent-free
- does not have a corrosive effect on the reinforcement
- Economical, simple and fast processing

Shade:
Component A: white, liquid; Component B: yellowish, liquid; Component C: grey; Components A+B+C: light grey

Chemical basis:
Epoxy resin-modified cementitious mortar

Shelf life:
At least 12 months from the date of production.

Storage:
Store in original, unopened containers under dry conditions. Components A and B: protect from frost; Component C: protect from moisture.

Container:
Comp. A+B+C: 29 kg