Sika® Sikafloor®-2350 ESD 30 kg

Details for Sikafloor®-2350 ESD 30 kg:

Dissipative, flow-through coating for areas according to DIN EN 61340-5-1

Sikafloor®-2350 ESD is a colored, two-component epoxy resin binder for electrostatically dissipative coatings. Total solids content according to the German Construction Chemicals Association (DEUTSCHE BAUCHEMIE) test method.

Application:
- For the production of colored, conductive coatings for indoor floors where the footwear-floor system serves as the main measure for personal earthing (DIN EN 61340-5-1).
- Suitable for use on surfaces within ESD-protected areas where low electrostatic charge (body voltage) and a conductive surface are required (EPA). Typical applications include the semiconductor industry, electronics industry, and microbiology and microchemistry. Also suitable for high-traffic areas on concrete and cement screeds, such as in the automotive industry, pharmaceuticals, production areas, warehouses, and workshops.

Advantages:
- Compliance with the ESD requirements according to DIN EN 61340-5-1
- Only a low electrostatic charge on the person < approx. 30V
- Volume conductive
- Good chemical and mechanical resistance
- Meets ESD requirements from >12% relative humidity / 23°C
- Easy to clean and liquid-tight
- Easy to apply

Shade:
Div. T.

Chemical basis:
2-component epoxy resin

Shelf life:
At least 12 months from the date of production.

Storage:
Store in unopened, undamaged original containers in a dry place at temperatures between +5°C and +30°C.

Container:
30 kg