Jaeger 676 2K Aqua Deco Wall & Floor Sealer incl. Hardener 2.5 kg colorless

Details for 676 2K Aqua Deco Wall & Floor Sealer incl. hardener 2.5 kg colorless:
High-quality sealant for Deco Wall & Floor
- easy to process
- Excellent abrasion resistance
- high durability
- very good penetration depth
- good progress
- Excellent resistance to household chemicals
- Taber Abraser Test CS/10/1000/1000g) 12mg (3 days, 23°C, 60% RH)
Purpose of use:
Protection and sealing of floor and wall surfaces treated with Deco Wall & Floor for upscale private areas.
Mixing ratio: 10 : 1
Mixing:
Mix both components mechanically until homogeneous. Then transfer to a clean container and stir again. Allow to pre-react for 15 minutes before processing.
Dilution:
If necessary, add 5-15% water.
Paint structure:
2K Aqua Deco Wall & Floor Sealer, first coat on absorbent surfaces, diluted 5-15%
Processing time/pot life:
6 hours at 20°C
Processing conditions:
Stir thoroughly before use. Only use the paint with the hardener and stir thoroughly. Sand lightly after each coat of sealant. During the entire application and drying time, the material, substrate, and air temperature must not fall below 15°C or exceed 30°C. The relative humidity should remain between 30% and 70% throughout the entire process. Low temperatures and high humidity will extend the drying time.
Tool cleaning:
Clean with water immediately after use. Remove dried paint residue with nitro thinner.
Cleaning/Maintenance:
Clean with a damp cloth and mild household cleaners. Do not use abrasive cleaners.
Shade:
Colorless
Gloss level:
satin finish
Drying time:
At 20°C and 55% relative humidity, dust-dry in approx. 45 minutes, walkable in approx. 24 hours, fully load-bearing in approx. 3 days.
Storage:
Store in a cool, dry place. Shelf life: 1 year in unopened original container. Protect from frost. Do not store above 40°C.