Jansen Sprint-Line 5 Liter

Details for Sprint-Line 5 liter:

Sprint-Line is a water-based, one-component marking paint that can be recoated after 1-2 hours and is ready for use again in record time: Work can resume immediately the next morning after just 12 hours. Annoying waiting times and long, costly production interruptions are now a thing of the past.

Scope:
One-pot system for marking walkways, parking spaces, safety markings, logistics markings, restricted areas and hazard symbols on bituminous surfaces (cast asphalt, asphalt concrete), on concrete surfaces (cement floors and paving stones) as well as on already coated surfaces, such as epoxy and PUR coatings indoors.
This marking paint is particularly suitable for use in halls with medium traffic, where speed (drivable after at least 12 hours) and odorlessness are paramount. Because the product is water-based, it can be used without problems in sensitive areas. A clear coat is not required with Aqua Hall Marking Paint.
By adding additive R (see TM), slip resistance class 11 is achieved.

Product features:
Sprint-Line is characterized by its speed and can be applied twice a day (recoatable within 1-2 hours) and is ready for driving on after drying overnight (at least 12 hours). The markings are durable and easy to clean. For improved visibility outdoors, Jansen reflective recoating beads can be sprinkled on the surface.

Binder base:
Special acrylate

Gloss level:
satin finish

Drying:
(23 °C 60 % relative humidity)
Completely dry: approx. 1 hour.
Can be painted over after 1-2 hours.
Accessible after approximately 6-8 hours
Fully load-bearing after drying overnight (at least 12 hours).
The values ​​can vary greatly depending on temperature and humidity.

Yield / Consumption:
On absorbent surfaces:
First coat approx. 250 ml/m²
2nd coat approx. 150 ml/m²
On non-absorbent surfaces:
Approximately 120–150 ml/m² per coat

Order type:
Brush, roll or spray.
Use a brush with plastic bristles for painting, and a short-pile roller for rolling.
Spraying, e.g. with the TITAN Powerliner 3500 (spray nozzle 415, pressure 120 to max. 160 bar).

Shade:
Div. T.

Use:
Exterior and interior

Container:
5 liters