Jansen swimming pool paint 2.5 liters white

Details for swimming pool paint 2.5 liters white:

Chlorinated rubber-based paint

Whether swimming pools, paddling pools, fish ponds or ornamental ponds, filter systems or pump systems – this chlorinated rubber-based pool paint offers a chlorine-resistant protective and decorative coating that is easy to clean.

Scope:
Protective and decorative coating for all surfaces such as concrete, masonry, mineral-based element panels in swimming pools, paddling pools, fish ponds, ornamental ponds, fountain basins, filter and pump systems. Not suitable for GRP pools and liner pools.

Product features:
Resistant to ozonated and chlorinated water, conditionally resistant to acids and alkalis, and at low concentrations resistant to salt solutions and minerals. Easy to clean. Not resistant to animal and vegetable fats and not suitable for use as a marine paint. Will not bridge static cracks.
Caution! Sunscreens may contain ingredients that can soften the paint with frequent contact. As a result, the paint can stain swimwear.

Binder base:
Chlorinated rubber

Gloss level:
silky sheen

Drying:
(at 23°C and 60% relative humidity)
Dust-dry after 1-2 hours; recoatable after approximately 24 hours.

Yield / Consumption:
Approximately 3-7 m²/l per coat

Order type:
Brushing: Use a brush with natural bristles for painting. Rolling: Use a short-pile roller for rolling. The paint dries only physically, therefore each subsequent coat will dissolve the previous one. Smooth quickly!

Shade:
White

Use:
Outside

Container:
2.5 liters